DMCRF

EMI RFI Power Line Filters

Category: RF Filter

This series of Power Line Penetration Filters can be mounted through the outer wall of a shielded enclosure. The filters are RFI secure and supplied with threaded nipple. Filters supplied with bleeder resistor to prevent shock hazard. Filters are also available with surge arresters.

Price: 

DMCRF

RFI EMC Filters 5 to 300 Amp

Category: RF Filter

Reliable. Low price. Hermetically sealed. Filter case is metallic and plated to prevent corrosion.

RFI EMC Filters are designed for low level interference. Objective is low cost, without compromising the quality and workmanship of the filter.

Price: 

DMCRF

RFI EMC Filters 25 to 200 AMP DMC FCL-11, -110, -14, -140, -1

Category: RF Filter

The filter herein described shall be designed for filtering of radio frequency interference and to meet the requirements of Military Specifications MIL-F-15733, where applicable. These filters may be used with other electrical devices to enable the devices to meet the requirements of MIL-I-26600, MIL-I-16910. MIL-I- 6181, MIL-I-11748, MIL-STD-461, 462, 463, FED-STD-222 and FCC Specification Part 18. Also, DCA specifications and others developed for special equipment and systems applications

Price:

DMCRF

RFI EMC Filters Accessories FCL 55, -66, -660 Series

Category: RF Filter

UL APPROVED CABINETS DMC-FC-20 000 SERIES
DMC-FCL 55, -66, -660 Series Filters are available installed in UL approved cabinets with standard knockouts.

Price:

DMCRF

Single Circuit QPL to MIL-F-15733/4 Style FL53

  • All units are rated 125VAC, 400VDC, 0- 400Hz
  • Operating Temperature Range: – 62°C – +85°C
  • Temperature Rise: 25°C
  • Maximum Voltage Drop, 0.5V
  • Units rated less that 10A supplied with solder lug terminals,

Price:

DMCRF

HEMP Filters

  1. Filters are listed per UL specification #1283
  2. Temperature Range: Operating -55°C to +85°C
  3. Enclosures are made from cold rolled steel with continuously welded seams
  4. Filter ground path connecting surfaces shall be tin plated or stainless steel
  5. Conduit hubs or clearance holes may be provided if specified when ordering
  6. Each phase filter is individually removable
  7. Internal filters are filed with a non-flammable impregnant and hermetically sealed
  8. Legs for floor mounting may be provided if specified when ordering
  9. Filters for 300AMP and up have 6” x 2” mounting U-Channel

Price:

DMCRF

Military EMI Filters

These Filters are available in two series

DMC-FC 00-W:  100dB attenuation from 14 kHz to 10 GHz measured per MIL-STD-220A full load

DMC-FC 00-X:  100dB attenuation from 14 kHz to 10 GHz measured per MIL-STD-220A full load. SPECIAL: Measured from 14 kHz to 20 MHz under full load condition with extended range buffer network

HIGHLIGHTS: High reliability. Special design and construction developed for secure communication areas, tempest shielded rooms. Designed for many years of continuous fail free service. All filters are field replaceable.

Price:

DMCRF

MRI Power Filters

Category: RF Filter

DMC is the leading supplier of MRI room ac power line filters in US. We offer complete solution MRI/MRA room filters, telephone filters, fire alarm filters and Ethernet filters, DMC filters are designed in the US to meet MIL-Std-220A and are UL approved. They are specially designed for the rapidly expanding medical MRI field.

Price:

DMCRF

TEMPEST COTS EMI Power Line Filter

Category: RF Filter

  1. Filters are listed per UL specification #1283
  2. Temperature Range: Operating -55°C to +85°C
  3. Enclosures are made from cold rolled steel with continuously welded seams
  4. Filter ground path connecting surfaces shall be tin plated or stainless steel
  5. Conduit hubs or clearance holes may be provided if specified when ordering
  6. Each phase filter is individually removable
  7. Internal filters are filed with a non-flammable impregnant and hermetically sealed
  8. Legs for floor mounting may be provided if specified when ordering
  9. Filters for 300AMP and up have 6” x 2” mounting U-Channel.

Attenuation 100dB from 14kHz to 18GHz measured under full load per Mil-Std 220C

130dB from 14kHz to 18GHz in Tempest application.

Price:

DMCRF

5G Millimeter wave (mmwave) RF Shielded Enclosure

Category: RF Shielded Enclosures

The DMC-5G-mmW series Millimeter wave RF shielded enclosures are advanced and compact direct field OTA test enclosure occupying minimal floor space. 100 mm thick high performance microwave absorber is fully lined on all walls, ceiling and floor. These enclosures can be used for 5G small cell, Pico cells, Femto and Microcell near field and far field measurements.

Product: DMC Millimeter Wave RF Shielded Enclosure

Price: