Polypropylene Honeycomb Panel

Polypropylene Honeycomb Panel  is a lightweight (hollow structure), non-toxic, shockproof, long lifespan, eco-friendly and recyclable non-metallic core material produced by polypropylene. Our customer can choose between bare core or facing with non-woven polyester fabric.

With non-woven PET fabric, pp honeycomb sheet can be easily further bonded with FRP, wood grain sheet, aluminum plate, stainless steel sheet, marble sheet, rubber sheet etc. It is also supplied with or without a pp film barrier under the PET fabric to limit the amount of resin consumption.

It’s widely used in van body for logistics and express, mobile house, caravan, package etc. Furthermore, Polypropylene Honeycomb Panel can also be used in air filters to reduce corrosive gas emissions and as flat surface for waterjet cutting machines.

  • Material: Polypropylene;
  • Supply Form: With or without non-woven polyester fabric; With or without pp film barrier;
  • Each cell has a tubular form;
  • The Range of Temperature Resistance: -40℃-80℃;
  • The price is relatively low in various kinds of honeycomb core.

Specification

  • Dimension: 1220*2440mm, etc.;
  • Core Thickness: 5mm-100mm;
  • Cell Size: 4mm, 6mm, 8mm, 10mm, 12mm, 16mm;
  • It can be customized according to customers requirements.

DMC PP Honeycomb Core Technical Properties

Item Color Cell   Size(mm) Density
(Kg/m3)
Compression    strength (MPa) Compression    modulus (MPa) Shear    Strength (MPa) Effective    Temperature
(oC)
Thermal

Insulation U-value (W/ m2k)

1 White 8 80 1.66 45.7 0.5 -40 – +80 2.2
2 White 10 75 1.58 41.2 0.45 -40 – +80 2.2
3 White 12 70 1.47 38.9 0.4 -40 – +80 2.3
Note:This table presents values of honeycomb obtained from testing specimens of 30mm  thickness. Data is based on results gained from experience and tests and is believed to be accurate yet without acceptance of liability for loss or damage incurred and attributable to reliance thereon as conditions of use lie outside our control.