Fully Anechoic Chamber

Fully Anechoic Chamber

Fully Anechoic chambers are widely used in both EMC and Antenna chambers for test application which required ground absorbers and fully lined Pyramidal wall absorbers. DMC FAC series can be utilized in Automotive, Military, Telecom and Defense test applications.

DMC-FAC-3M (3meter Fully Anechoic EMC Chamber)

Page-2-Image-5

DMC-FAC-3M is a Fully Anechoic Chamber or referred as FAC Chamber with 3 meter measurement distance. This chamber is similar to a semi-anechoic chamber, except absorbers are placed on ground plane as well to simulate a free space environment. It is made up of DMC-PAN series self-standing shielding, ferrite tiles and Polypropylene based hybrid absorbers on all walls, ceiling and floor.

DMC-FAC-3M can be used for fixed height pre-compliant radiated emissions as per CISPR-16-1-4 and compliant radiated immunity measurements as per IEC 61000-4-3

Product Compliance Standard

Emission Immunity
CISPR 14 IEC/EN 61000-4-3
CISPR 32
ETSI
MIL-STD 461

Verification Standard

Emission Immunity
CISPR 16-1-4 IEC/EN 61000-4-3
IEC/EN 61000-4-22 IEC/EN 61000-4-22

Technical Specification

Chamber Type DMC-FAC-3M
External dimension 8.0m x 3.9m x 3.5m (LxWxH)
Quiet Zone ø1,0m x 0.5m
Load capacity 1500 Kg (Minimum), Higher load capacity option available
Frequency range 30 MHz to 40 GHz

Performance & Compliance

  • Full Compliance Emission per ANSI C63.4 and CISPR-16
  • Normalized site attenuation deviation (NSA) is better than  ±3.5 dB between from 30MHz to 1 GHz sVSWR deviation better than ±5.5 dB from 1 GHz to 18 GHz.
  • Full Compliant Immunity per IEC/EN 61000-4-3
  • Field Uniformity deviation better than 6 dB at 75% of 16 measuring points from 26 MHz/ 80 MHz to 18 GHz